ABB ACH580-01 Series Manual de instruções - Página 3

Procurar online ou descarregar pdf Manual de instruções para Equipamento industrial ABB ACH580-01 Series. ABB ACH580-01 Series 7 páginas. Base drive replacement
Também para ABB ACH580-01 Series: Manual (16 páginas), Manual de instalação rápida e de arranque (17 páginas), Manual de instruções (8 páginas), Manual de instalação rápida e de arranque (17 páginas), Manual de instalação rápida e de arranque (17 páginas)

REPLACEMENT INSTRUCTIONS | ACH580-01 VXR UL TYPE 1 , R2/R3/R4

Step

Instruction

Cut zip ties

by pulling out the terminal block.

NOTE: Remove any additional drive I/O wiring.

R4 Frame: Remove zip ties securing the input and output wires to

the drive conduit plate.

R2 & R3 Frame: Using a PZ2 bit, loosen and remove wires from the

input and motor terminals of the drive.

R4 Frame: Using a T20 bit, loosen and remove wires from the input

and motor terminals of the drive.

Using a PZ3 bit, loosen and remove ground wire from the drive.

R2 Frame: Using a T20 bit, loosen and remove two (2) M4x8 screws.

Remove conduit assembly.

R3 Frame: Using a T20 bit, loosen and remove four (4) K40x12

screws. Remove conduit assembly.

R4 Frame: Using a T25 bit, loosen and remove four (4) M5x16

screws. Remove conduit assembly.

and disconnect the RS485 cable

Diagram

from the drive