CAB HS 120 Manual do operador - Página 15

Procurar online ou descarregar pdf Manual do operador para Fabricante de etiquetas CAB HS 120. CAB HS 120 18 páginas. Label dispenser

4
Operation

4.2.2 Operation Modes

 Check the operation mode by means of the LEDs (2 / 3 / 4).
 Touch button
Automatic Peel-Off
 After switching in the "Automatic peel-off" mode the first label will
immediately be fed to the peel position.
 Take the label.
The next label will be fed to the peel position.
!
Attention!
Risk of unintended start-up.
 Do not touch the feeler of the present sensor excepting the
error treatment.
Peel-Off on Demand
 For peeling-off a label touch button
 Take the label.
 For peeling-off the next label touch button
Peel-Off on Demand with External Control
for devices with peripheral port only
If an external control is connected LED (2) is illuminated.
i
Notice!
With an external control connected the device cannot be switched to
the "Automatic peel-off" mode.
The release button
 Send a start signal.
A label will be fed to the peel position
 Take the label.
 Send a new start signal.
for changing the operation mode.
has no function.
.
again.
15