CAB HS 120 Manual do operador - Página 16

Procurar online ou descarregar pdf Manual do operador para Fabricante de etiquetas CAB HS 120. CAB HS 120 18 páginas. Label dispenser

Operation

4.2.3 Setting Speed

 Check the chosen speed by means of the LEDs (5 / 6).

 Touch button

 Touch button

If no label is detected by the present sensor within 5 seconds after starting

the peel-off operation, the label transport will be stopped and an error will be

signalized :

The counter display is flashing.

•

The LED for the chosen operation mode is flashing.

•

Cause

Out of labels

The peeled label does not activate

the present sensor

Material transport is interrupted

Table 2

 Rectify error.

 Continue operation by touching button

start signal or releasing the present sensor manually.

for changing the speed setting.

for resetting the counter.

Fault Correction

Remedy

Insert new material

Adjust present sensor

Reduce speed

Remove material from rewinder

respectively sending a