CAB HS 120 Manual do operador - Página 17

Procurar online ou descarregar pdf Manual do operador para Fabricante de etiquetas CAB HS 120. CAB HS 120 18 páginas. Label dispenser

Operation

4.2.6 Adjusting the Dispense Plate

The label material must run parallel to the chassis, failing this :

 Loosen screw (2).

 If the material (1) runs away from the chassis, pull the dispense plate a

little out of the guiding (4).

 If the material (1) runs against the chassis, push the dispense plate a little

into the guiding (4).

 Tighten screw (2) .

 Dispense several labels to test the material run.

Fig. 11

Material run

Fig. 12

Adjusting the dispense plate