Cisco WAP361 Manual de início rápido - Página 6
Procurar online ou descarregar pdf Manual de início rápido para Ponto de acesso sem fios Cisco WAP361. Cisco WAP361 17 páginas. Reboot and reset to factory default settings
Também para Cisco WAP361: Manual (4 páginas)
Imprimir página
For wall mounting, drill four pilot holes at the mounting hole
S
2
TEP
locations you have marked (at opposite corners of the bracket),
and use appropriate anchors as required.
The pilot hole size varies according to the material, and its
N
OTE
thickness, you are fastening. Cisco recommends that you test the
material to determine the ideal hole size for your mounting
application.
Feed the cable(s) from the junction box / wall through the large
S
3
TEP
center cable access hole in the bracket, with the words "NOTICE
WALL MOUNT ONLY" facing you as shown in
Figure 2
Bracket Mounting Direction
Position the mounting bracket mounting holes (with the words
S
4
TEP
"NOTICE WALL MOUNT ONL Y" facing you) over the screw holes.
Insert a screw into each mounting hole and tighten.
S
5
TEP
Screws supplied in kit (see
N
OTE
all
for
mounting options. You may need to obtain screws which fit
your custom installation.
6
Figure
Figure
3) may not be appropriate
Cisco WAP361 Quick Start Guide
2.