Cisco VG202 Manual de instalação do hardware - Página 39

Procurar online ou descarregar pdf Manual de instalação do hardware para Porta de entrada Cisco VG202. Cisco VG202 50 páginas. Voice gateways
Também para Cisco VG202: Manual de configuração do software (50 páginas), Manual (10 páginas), Manual de instalação do hardware (48 páginas), Manual de início rápido (19 páginas)

Imprimir página
Cisco VG202 Manual de instalação do hardware
Chapter 3
Installing Cisco VG202 and Cisco VG204 Voice Gateways
To connect a terminal or PC to the console port on the voice gateway and access the CLI, follow these
steps:
Connect the RJ-45 end of a DB-9–to–RJ-45 serial cable to the RJ-45 Console Aux port on the voice
Step 1
gateway.
voice gateway.
Figure 3-7
1
Connect the DB-9 end of the RJ-45–to–DB-9 serial cable to the to the COM port on your laptop or PC.
Step 2
Note
To communicate with the voice gateway, begin a terminal emulator application.
Step 3

Connecting an FXS line

Use a standard straight-through RJ-11 modular telephone cable to connect a Foreign Exchange Service
(FXS) port to a telephone or fax machine.
This equipment contains a ring signal generator (ringer), which is a source of hazardous voltage. Do
Warning
not touch the RJ-11 (phone) port wires (conductors), the conductors of a cable connected to the RJ-11
port, or the associated circuit-board when the ringer is active. The ringer is activated by an incoming
call.
OL-15959-01
Figure 3-7
shows the RJ-45 end of the serial cable connected to the Console Aux port on the
Connecting a Terminal or PC to the Console Port
VG 20 4
Fa stE the rne
t
CO NS OL E
FX S
0/1
0/0
AU X
0/3
0/2
0/1
0/0
1
RJ-45 connector to the Console Aux port on
the voice gateway
Some laptops and personal computers do not have DB-9 serial port connectors and may require
a USB–to–serial port adapter.
Cisco VG202 and Cisco VG204 Voice Gateways Hardware Installation Guide
12 V DC
SA
2
2
DB-9 connector
Connecting Cables
3-11