Toshiba DIGITAL Series Notas de instalação - Página 3

Procurar online ou descarregar pdf Notas de instalação para Impressora tudo em um Toshiba DIGITAL Series. Toshiba DIGITAL Series 4 páginas. Split type
Também para Toshiba DIGITAL Series: Manual do Proprietário (48 páginas), Manual do utilizador (45 páginas), Manual do utilizador (49 páginas), Manual do Proprietário (50 páginas), Manual do utilizador (48 páginas), Manual do Proprietário (4 páginas), Manual do Proprietário (41 páginas), Manual do Proprietário (22 páginas)

Toshiba DIGITAL Series Notas de instalação
43
CONNECTOR
INSTALLATION INSTRUCTIONS
Note: Toshiba's 2.5" HDDs are primarily used in notebook devices. Installation
into a notebook varies depending on the system manufacturer. Toshiba's 2.5"
drives that are installed into a desktop PC require a 3.5" installation kit.
1. Determine mounting configuration (can be mounted in either a horizontal or
vertical orientation).
2. Configure drive for system application.
3. Configure the adapter board for the specific system application (if required).
4. Install the I/F cable to the System's 44 pin connector port or adapter board.
Ensure Pin 1 is oriented correctly. (Pin 1 on the cable is usually identified by a
red or blue stripe.)
5. Refer to applicable manuals for software installation instructions.
P/N 480056-F0
08/04
INTERFACE
FIGURE 1 – 2.5" HDD JUMPER LOCATIONS
JUMPER
No Jumper
C-D Jumper
B-D Jumper
B-D Jumper
A-B Jumper
A-C Jumper
MOUNTING HOLES
FIGURE 2 – MOUNTING HOLE LOCATIONS
2.5" Hard Disk Drive Installation Notes - 9.5mm GAS Series
KEY
PIN 20
P28
DRIVE
-
Master Drive
-
Slave Drive
LOW
Master Drive
Slave Drive
HIGH
-
Slave Drive/
-
Prohibit
1
C A
D B
JUMPERS