Alcohol Countermeasure Systems Alcolock V3 B-2 Series Manual de instruções - Página 6
Procurar online ou descarregar pdf Manual de instruções para Equipamento de teste Alcohol Countermeasure Systems Alcolock V3 B-2 Series. Alcohol Countermeasure Systems Alcolock V3 B-2 Series 20 páginas.
Imprimir página
INTRODUCTION
HOW DOES IT WORK?
The ALCOLOCK V3 device uses the same alcohol sensing technology used by police
in roadside screening. A special alcohol-sensitive cell detects the amount of alcohol in
the breath. Breath alcohol concentration (BrAC) is directly proportional to the amount of
alcohol in the blood. The blood alcohol concentration limit is customizable and can be
set to any specific jurisdictional requirement.
INSTALLATION
The ALCOLOCK V3 device is to be installed by a qualified installer in accordance with
national regulations. An unqualified installation may invalidate the type approval of the
vehicle.
MORE INFORMATION
ALCOHOL INFLUENCE ON TESTING
Drinking alcohol and eating foods containing alcohol will cause a failed alcohol test.
Some other factors that may affect a test (because they may contain or produce
residual alcohol in the mouth) are medicines, drops, burping, smoking, using
mouthwash or mouth spray.
Rinsing the mouth with water after using mouthwash or mouth spray will remove the
alcohol content in the mouth.
According to the previous information, do not eat, smoke or drink for at least 10
minutes before taking a test.
Additionally do not spray any air fresheners, disinfectants, cologne or perfume in the
vehicle prior to a test, as these can also contain alcohol.
NOTE: The above mentioned list of factors that may affect a test is not exhaustive. There
are additional items that may affect the results of a breath test. Follow this guide carefully
to avoid incorrect results.
1
WHAT IS AN ALCOHOL INTERLOCK?
An alcohol interlock is an in-vehicle breath alcohol testing device.
It prevents a vehicle from starting if it detects that a driver's breath
alcohol concentration (BrAC) is over a preset limit. It is designed to
fit inside the vehicle, near the driver's seat, and connects directly to
the vehicle's ignition system. The device consists of a handset and
ECU. The ECU enables or disables the ignition of the motor and
stores the handset settings.
ALCOLOCK V3 SERIES B-2