Zanussi ZHC 935 Folheto de instruções - Página 14

Procurar online ou descarregar pdf Folheto de instruções para Campânula de ventilação Zanussi ZHC 935. Zanussi ZHC 935 20 páginas. Cooker hood
Também para Zanussi ZHC 935: Folheto de instruções (19 páginas), Folheto de instruções (20 páginas)

Imprimir página

Fitting the Canopy Hood

Before starting to fix the canopy, tighten

the two screws Vr located on the canopy

mouiunting brackets.

Hook the canopy onto the screws (not

supplied).

Tighten up the screws.

Adjust the screws item Vr to level the

canopy.

The fixings come together with the splashback.

Ducting the Cooker Hood

When installing the cooker hood in the ducting

mode, connect the hood using either Ø150 or

120mm flexible or rigid pipe.

The choice of ducting should be specified by the

installer but Ø150mm rigid ducting will ensure the

best performance possible.

The ducting used must be manufactured

from fire retardent material conforming

to the relevant British Standard or DIN

4102-B1.

Fitting the Ducting

To install Ø120mm ducting, fit the ducting

spigot Ø150-120mm item 9 on to the

spigot on top of the canopy.

To install Ø150mm ducting, fit the ducting

on the spigot on top of the canopy.

Remove the activated charcoal filter.

Recirculating the Cooker Hood

The cooker hood is supplied specified for use in

the recirculation mode, with the charcoal filter

already fitted.

Fitting the Recirculation Duct

Assemble the two halves of the ducting

extension pipe item 14.

Push-fit the extension pipe on to the

ducting spigot on top of the canopy.

Push-fit the recirculation adapter item 15

on to extension pipe item 14.

Insert the recirculation outlet extensions

item 14.4 into the recirculation adapter

item 15.

The recircualtion grilles item 8a and 8b

must be fitted after the lower chimney

item 2.2 has been fitted.

Electrical Connection

Connect the hood to the mains supply via a

double-pole switch having a contact gap of at

least 3mm.

INSTALLING THE COOKER HOOD

ø 150

ø 120

14.1