Clarke Woodworker CMS251 Manual de operação e manutenção - Página 13
Procurar online ou descarregar pdf Manual de operação e manutenção para Serra Clarke Woodworker CMS251. Clarke Woodworker CMS251 19 páginas. Compound mitre saw
Imprimir página
MAINTENANCE
1. General
User maintenance is limited to changing the saw blade when necessary, renewing
the motors' carbon brushes, maintaining adjustments, and ensuring that after use,
any sawdust or wood chips are cleaned away, with a low pressure air line or
brush, paying particular attention to the motor air vents which should be kept
clear at all times.
Should the motor not function normally, it is possible that it has become clogged
with saw dust, in which case, it will be necessary to disassemble the motor in order
to clean the various components. Contact your CLARKE dealer for advice.
2. Changing the Saw Blade
IMPORTANT: Exercise extreme care when
handling the saw blade. The tips are
extremely sharp, and careless handling
could result in severe personal injury.
1.
With the machine disconnected from the
mains supply, and the Cutting Head in
the raised position, remove the Blade
Guard Arm Link Pin, arrowed in Fig. 8, and
retain.
2.
Slacken the Blade Guard Bracket
securing screw, shown at 'A' in Fig. 9, and
REMOVE the screw 'B'. (Leave Screw 'A'
in place.)
This will allow the Lower Blade Guard to
be removed completely.
Take great care from this point, not to
come into contact with the saw blade
teeth.
3.
Remove the two screws securing the left
hand lower plastic guard, arrowed in Fig.
10, and remove the guard.
13
Fig.8
Fig.9
Fig.10