Nikon D90 - Digital Camera SLR Manual do utilizador - Página 17

Procurar online ou descarregar pdf Manual do utilizador para Acessórios para câmaras Nikon D90 - Digital Camera SLR. Nikon D90 - Digital Camera SLR 26 páginas. Focal digital camera
Também para Nikon D90 - Digital Camera SLR: Brochura e especificações (9 páginas), Manual de operação (20 páginas), Especificações (2 páginas), Lista de controlo e manual de operações (25 páginas), Manual (28 páginas), Como é que (6 páginas), Manuais (30 páginas)

J2 connecter - iTTL or eTTL mode through optional TTL converter

J2 connecter - iTTL or eTTL mode through optional TTL converter +

Manual mode

mode, only the Q line of the TTL strobe has to be switched on.

Vacuum system

When the battery is installed, the HugyCheck system is in 'stand-by' mode

and the red LED on the camera hot shoe will blink every 5 seconds. To start

the vacuum procedure, please make sure that the system is in 'stand-by'

Start the vacuum procedure at least 30 min prior to the dive.

mode.

Check the main O-ring and port O-ring and close the housing.

Make sure the port is installed properly.

Install the one-way valve into the 3rd bulkhead and remove the

sealing cap.

Insert the plug on the electrical vacuum pump into the one-way

valve and press the button on the pump.

One way valve installed in 3rd bulkhead

(only on new models).

Hugyfot Housing for

When the camera hot shoe is connected to J2 and

when conventional TTL strobes are used in combina-

tion with the optional TTL converter, only the Q lines

of both strobes have to be switched on.

When the camera hot shoe is connected to J2 and

when 1 conventional TTL strobe is used in combina-

tion with the optional TTL converter in combination

with 1 conventional strobe that is used in manual

Nikon D90

One way valve installed in manifold

(old models which only have 2 bulkheads).

User manual