Nikon D90 - Digital Camera SLR 사용자 설명서 - 페이지 17

{카테고리_이름} Nikon D90 - Digital Camera SLR에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Nikon D90 - Digital Camera SLR 26 페이지. Focal digital camera
Nikon D90 - Digital Camera SLR에 대해서도 마찬가지입니다: 브로셔 및 사양 (9 페이지), 운영 매뉴얼 (20 페이지), 사양 (2 페이지), 체크리스트 및 운영 매뉴얼 (25 페이지), 매뉴얼 (28 페이지), 방법 (6 페이지), 매뉴얼 (30 페이지)

페이지 인쇄

1. Techical Information

J2 connecter - iTTL or eTTL mode through optional TTL converter

J2 connecter - iTTL or eTTL mode through optional TTL converter +

Manual mode

mode, only the Q line of the TTL strobe has to be switched on.

Vacuum system

When the battery is installed, the HugyCheck system is in 'stand-by' mode

and the red LED on the camera hot shoe will blink every 5 seconds. To start

the vacuum procedure, please make sure that the system is in 'stand-by'

Start the vacuum procedure at least 30 min prior to the dive.

mode.

Check the main O-ring and port O-ring and close the housing.

Make sure the port is installed properly.

Install the one-way valve into the 3rd bulkhead and remove the

sealing cap.

Insert the plug on the electrical vacuum pump into the one-way

valve and press the button on the pump.

One way valve installed in 3rd bulkhead

(only on new models).

Hugyfot Housing for

When the camera hot shoe is connected to J2 and

when conventional TTL strobes are used in combina-

tion with the optional TTL converter, only the Q lines

of both strobes have to be switched on.

When the camera hot shoe is connected to J2 and

when 1 conventional TTL strobe is used in combina-

tion with the optional TTL converter in combination

with 1 conventional strobe that is used in manual

Nikon D90

One way valve installed in manifold

(old models which only have 2 bulkheads).

User manual