Nikon D90 - Digital Camera SLR Kullanıcı Kılavuzu - Sayfa 17

Kamera Aksesuarları Nikon D90 - Digital Camera SLR için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Nikon D90 - Digital Camera SLR 26 sayfaları. Focal digital camera
Ayrıca Nikon D90 - Digital Camera SLR için: Broşür ve Teknik Özellikler (9 sayfalar), Kullanım Kılavuzu (20 sayfalar), Teknik Özellikler (2 sayfalar), Kontrol Listesi ve Operasyon Kılavuzu (25 sayfalar), Manuel (28 sayfalar), Nasıl Yapılır (6 sayfalar), Kılavuzlar (30 sayfalar)

J2 connecter - iTTL or eTTL mode through optional TTL converter

J2 connecter - iTTL or eTTL mode through optional TTL converter +

Manual mode

mode, only the Q line of the TTL strobe has to be switched on.

Vacuum system

When the battery is installed, the HugyCheck system is in 'stand-by' mode

and the red LED on the camera hot shoe will blink every 5 seconds. To start

the vacuum procedure, please make sure that the system is in 'stand-by'

Start the vacuum procedure at least 30 min prior to the dive.

mode.

Check the main O-ring and port O-ring and close the housing.

Make sure the port is installed properly.

Install the one-way valve into the 3rd bulkhead and remove the

sealing cap.

Insert the plug on the electrical vacuum pump into the one-way

valve and press the button on the pump.

One way valve installed in 3rd bulkhead

(only on new models).

Hugyfot Housing for

When the camera hot shoe is connected to J2 and

when conventional TTL strobes are used in combina-

tion with the optional TTL converter, only the Q lines

of both strobes have to be switched on.

When the camera hot shoe is connected to J2 and

when 1 conventional TTL strobe is used in combina-

tion with the optional TTL converter in combination

with 1 conventional strobe that is used in manual

Nikon D90

One way valve installed in manifold

(old models which only have 2 bulkheads).

User manual