Fleck 7000SXT Manual de instalação
Procurar online ou descarregar pdf Manual de instalação para Controlador Fleck 7000SXT. Fleck 7000SXT 17 páginas.
Getting Started
Make a list
Copyright © 2012 Quality Water Treatment, All right reserved. rev. 4.19.2013
Fleck 7000 SXT
Installation Guide
Make a list of all of the plumbing fittings needed to install; a typical list looks like this:
Eight 90° elbows, two – female adapters if installing in plastic.
Proper amount of pipe you need
½" drain line
Page 1 of 17
Before you assemble your new system, be sure that the following conditions
have been met for placement of your softener:
Level, firm surface, such as concrete, on which to place the softener
tank and salt tank AKA Brine Tank.
Nearby floor drain or standpipe to connect to the softener for use
during each regeneration.
Standard US plug, 120v 60hz (the softener system includes a 5ft.
power cord and plug). Be sure the outlet you use is not connected to
a light switch.
Fleck 7000 SXT
http:// www.Qualitywatertreatment.com