Fleck 7000SXT Manual de instalação - Página 4

Procurar online ou descarregar pdf Manual de instalação para Controlador Fleck 7000SXT. Fleck 7000SXT 17 páginas.

 Final water line

Installation

1. First, Measure and cut the lengths of pipe you need to plumb the hard water line into your softener unit.

Then do the same for the soft water line that will exit from the softening unit back into the home.

2. The unit will be marked either on the back of the valve body itself with the word "In" and "out" or the top

of the body of the bypass valve assembly will have arrows showing the direction of water flow. "OUT" is

the water entering your house after it passes through the water softener. Shown in Figure 1. PLEASE be

careful to follow these correctly, making sure you plumb the system in the right direction otherwise you

will lose the resin out of your tank into your house lines!

3. Once you have made all the connections put the system in Bypass (holes in the two bypass handles should

be Up and Down)

4. Put the threaded drain line adapter in place (figure 2) using Teflon tape (only) to make sure it's snug.

Page 4 of 17

Fleck 7000 SXT

Figure 1

Figure 2

http:// www.Qualitywatertreatment.com