180 INNOVATIONS KD-2250 Руководство по эксплуатации - Страница 5
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Термометр 180 INNOVATIONS KD-2250. 180 INNOVATIONS KD-2250 8 страниц. Digital temple thermometer
Печатать страницуMe m or y F un ct io n s
Reca ll m emo r y
1. To recall a memory, you must begin with the device
being powered off.
2. Press and hold the ON/OFF button until the last
record shows.
3. Press and release the ON/OFF button to recall up
to 9 previous records.
4. If no operation, the device will beep twice indicating
it is ready for measuring.
De let e m emor i e s
1. Repeat RECALL MEMORY step 1 and step 2.
2. Press and hold the ON/OFF button for about 3
seconds until "dEL".
3. Press and release the ON/OFF button again to
delete all stored records in device.
4. The device will power off automatically.
O th er w i se,
5. To stop deleting memory, no operation when you
see "dEL".
6. The device will be ready for measuring after 2
seconds.
7
U s e
Measurement Consideration
CAUTION
1. Make sure the measuring site is dry, clean and free of sweat and
cosmetics prior to measurement taking.
2. Clean the probe before and after each measurement to prevent
cross-contamination, see Cleaning & Disinfection.
3. After cleaning and disinfecting the probe, please wait at least 2
minutes to do a measurement.
1. Place the probe on the temple. Temple area is located between the
outer corner of the eye and the hairline, right on top of the temporal
artery area.
2. For the most accurate measurements, be sure to hold the probe
firmly (but not too hard) on temple.
3. Once you have placed the probe on the temple, do not move
before the measuring is done.
Doing a Measurement
1. Press the ON/OFF button to turn on the device, it will
auto self-diagnosis.
2. When all symbols appear on the display, the self-
diagnosis is finished, it is ready for measuring.
3. After the device beeps twice, place the probe on
the measuring site.
4. The measurement is done when you hear one
long beep.
5. Read the temperature on LCD.
6. Backlight will light up in accordance with the reading.
Please refer to Table 1.
7. The device's fever alarm will beep continuously when
the temperature reading is higher than 99.5°F.
8