Canon PIXMA MP610 Series Руководство по эксплуатации - Страница 24

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Принтер "все в одном Canon PIXMA MP610 Series. Canon PIXMA MP610 Series 45 страниц. All-in-one photo inkjet printer
Также для Canon PIXMA MP610 Series: Начните здесь (2 страниц), Дополнительное руководство (6 страниц), Брошюра и технические характеристики (2 страниц), Краткое руководство по эксплуатации (40 страниц), Краткое руководство по эксплуатации (2 страниц)

MP610 --- 3. REPAIR

3-3. Adjustment / Settings

(1) Paper feed motor adjustment

1) When attaching the motor, fasten the screws so that the belt is properly stretched (in the direction indicated by the blue arrow in the

photo below).

2) After replacement, be sure to perform the service test print, and confirm that no strange noise or faulty print operation (due to

dislocation of the belt or gear, or out-of-phase motor, etc.) occurs.

- The screws securing the paper feed motor may be loosened only at replacement of the paper feed motor unit.

DO NOT loosen them in other cases.

(2) Document pressure plate sheet (sponge sheet) replacement

1) Peel off the cover sheet from the double-sided adhesive tape on the back of the document pressure plate sheet.

With the long-side down, position the lower-right corner of the document pressure plate sheet at the scanning reference point on the

platen glass (front right where the red lines cross in the photo above).

2) Slowly close the document pressure plate while maintaining the hinge position. The document pressure plate sheet will attach to the

plate.

3) Open the plate to confirm the following:

- No extension of the sponge edges over the mold part of the upper scanner cover.

- No gap between the platen glass reference edges and the corresponding sponge edges.

22 / 43

TABLE OF CONTENTS