Amphenol Telect nrgCONTROL-BT Руководство по установке - Страница 3

Просмотреть онлайн или скачать pdf Руководство по установке для Контроллер Amphenol Telect nrgCONTROL-BT. Amphenol Telect nrgCONTROL-BT 11 страниц.

Section One: Overview

The Amphenol Telect nrgCONTROL-BT coordinates and collects data for up to 30 nrgSMART enabled devices. Panels

are connected over a simple daisy chain connection. One IP address is all that is required for all attached PDU panels.

For new deployments the controller interface is built into the nrgBDFB. For expansion, single rack deployment or outdoor

enclosures, Amphenol Telect provides the 1RU controller.

The nrgCONTROL-BT is capable of connecting to DC power in the range of -20V to -57V. Redundant power input is also

configurable based on the pin-out description in Fig. 3.

Using nrgSMART's SNMP interface, pull data into your network management system of choice to get network wide

access and visibility to sites that deploy the nrgSMART controller/PDU panels. Get real-time data such as current,

voltage, breaker trips or blown fuses, and temperature for individual circuits. Uniquely identify and label assets to their

individual circuit. It is now possible to track performance based on asset.

Pin Number

Pin 1

Pin 2

Pin 3

Pin 4

nrgCONTROL-BT

Feed

Voltage Polarity

A feed

Positive voltage

A feed

Negative voltage

B feed

Positive voltage

B feed

Negative voltage

Amphenol Telect

1-509-926-6000 — telect.com