CommScope FACT Руководство по установке - Страница 3

Просмотреть онлайн или скачать pdf Руководство по установке для Промышленное оборудование CommScope FACT. CommScope FACT 9 страниц. Fanout fixation kit
Также для CommScope FACT: Инструкция по установке (8 страниц), Инструкция по установке (12 страниц), Инструкция по установке (8 страниц)

Cable preparation

5.1.

5.1.1.

Mark the stripping point on the cable jacket. Make

sure that you have at least 2 meter of cable left.

5.1.2.

Cut the cable jacket at the marked point and

approx. 150 mm from the cable end to get access to the rip

cord.

5.1.3.

Use the rip cord to strip off the cable jacket.

5.1.4.

Separate the aramid yarns from the loose tubes.

Apply 2 pieces of foam.

5.2.

Cable preparation without central

strength member

5.2.1.

Fix the cable with 2 tie wraps. Route the aramid

yarns to the backside of the bracket.

5.2.2.

Make several turns around the strength member

connector to fix the aramid yarns, by using the allen key.

5.3.

Cable preparation with central

strength member

5.3.1.

Cut the strength member on length of+/- 55 mm.

Page 3 of 9