Carmanah SPEEDCHECK Руководство по замене - Страница 7
Просмотреть онлайн или скачать pdf Руководство по замене для Контроллер Carmanah SPEEDCHECK. Carmanah SPEEDCHECK 10 страниц. For the solar-powered speedcheck-15/18 radar speed signs
Также для Carmanah SPEEDCHECK: Руководство по замене (11 страниц), Руководство по замене (10 страниц)
Печатать страницу3.2
SPEEDCHECK-15/18
1. Disconnect power to the SPEEDCHECK-15/18 sign by removing the fuse(s) in the associated battery
cabinet.
2. Disconnect the wiring and remove the existing charge controller from the battery cabinet. Remove the
solar panel wires last and cap off temporarily with wire nuts.
3. For systems that are replacing the legacy ASC charge controller you will require the retrofit mounting
bracket. Attach the new charge controller using the provided mounting screws to the battery box. All six
screws are required when replacing the ASC charge controller.
4. Refer to
Section 3.1
Radar sign power
cable to Load +/-
a. Ensure the radar sign power cable is connected to the load terminals. This will enable the sign to
take advantage of the charge controller's built-in low voltage disconnection protection.
b. Keep track of the polarity for each component (red/yellow = positive, black/brown = negative).
5. Refer to
Section 4.0
removed, otherwise the charge controller may exhibit a load error.
6. Reinstall the fuses in the battery cabinet to apply power to the radar sign. Ensure the charge controller
charging status LED turns green and the battery starts charging.
Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |
and below for wiring the new charge controller, using the same existing wiring.
Without StreetHub Option
to confirm if your system has a large capacitor installed. If this is present it must be
SOLAR CHARGE CONTROLLER
REPLACEMENT GUIDE
With StreetHub Option
Radar sign power
cable to DC+/-
7
|
carmanah.com