DryGuy Thermanator DG2 Руководство по эксплуатации - Страница 5
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Сушилка DryGuy Thermanator DG2. DryGuy Thermanator DG2 8 страниц. Silent boot, shoe and glove dryer
Печатать страницуLIST OF COMPONENTS
• DryGuy
Thermanator
™
• Stands – 1 piece
• Plastic saddle clamps with self locking nuts – 2 sets
• Hex wrench – 1 piece
• 1" screws – 4 pieces
• 2" screws – 6 pieces
• Plastic wall anchor – 4 pieces
• Wall mounting brackets – 2 pieces
• Screw cover – 4 pieces
ASSEMBLY AND MOUNTING INSTRUCTIONS
self sTANdINg INsTRUcTIONs:
• Locate the two stands, two plastic saddle clamps and the two self locking nuts.
• Place the upper saddles over the top of the main metal tube, as illustrated, and push the bolts through
the lower saddle clamp, pinning the main metal tube in-between.
• Guide the stands onto each set of bolts as illustrated (See Fig. 1) and semi-tighten the four self-locking
nuts.
• Position the stand so the toe of the boot or shoe is the highest point.
• Adjust DryGuy
™
• Firmly tighten the four self locking nuts with hex wrench which is provided.
WAll MOUNTINg INsTRUcTIONs:
• Wall mount installation does not require stands.
• Locate the two plastic saddle clamps, two self locking nuts and two metal wall-mount brackets.
• Place the upper saddles over the top of the main metal tube, as illustrated, and push the bolts through
the lower saddle clamp, pinning the main metal tube in-between.
• Guide the wall-mount brackets onto the bolts and semi-tighten the four self locking nuts.
with power cord – 1 piece
™
Thermanator
as necessary to an upright position.
™
dryguy.com
Fig 1