Auber Instruments WS Series Руководство по эксплуатации и инструкция - Страница 3

Просмотреть онлайн или скачать pdf Руководство по эксплуатации и инструкция для Контроллер Auber Instruments WS Series. Auber Instruments WS Series 18 страниц. Programmable pid temperature controller with dual probe
Также для Auber Instruments WS Series: Краткое руководство (15 страниц), Краткое руководство (14 страниц), Руководство по эксплуатации и инструкция (18 страниц), Краткое руководство (14 страниц)

Operating Instructions

1) Description of the controller.

Figure 1. Front Panel

(1) Parameter Window (LED) - for displaying temperature values and controller's

system parameters.

(2) Output status indicator - In normal mode, this LED indicates the heater status.

When it is on (lit), the heater is powered. When it is off, the heater power is off. When

it is flashing, it means the heater is on and off intermittently to reduce the power

output. It should be synchronized with the power light on the cooking device.

(3) SET Key - for showing current temperature settings, entering parameters setting

mode and confirming various actions taken.

(4) "+" Key - To increment displayed value.

(5) "-"Key - To decrement displayed value.

(6) Time Key - Change the Parameter Window between current timer and

temperature values, when pressed.

(7) Alarm indicator - Lit when the alarm is on.

(8) Timer status indicator - In normal mode, when "(8)" is on and "(9)" is flashing,

LED shows the time passed since it's powered on.

(9) Mode indicator - the small "dot" is used to indicate what mode the controller is in.