Automatic Solutions ASA244BS Руководство по установке и обслуживанию - Страница 5

Просмотреть онлайн или скачать pdf Руководство по установке и обслуживанию для Открыватель ворот Automatic Solutions ASA244BS. Automatic Solutions ASA244BS 14 страниц. Industrial swing gate operator

Печатать страницу



Ideally weld the mounting plate provided to the steel post and use extra strengthening brackets if

necessary to ensure a solidly fixed mounting plate (i.e. strengthening brackets may be required if post

is less than approximately 150mm wide).



If mounting to masonry or similar, either drill holes or weld tags onto the mounting plate or as a last

resort fix the operator straight to the wall preferably using suitable chemical type anchors to ensure a

firm mounting is obtained.



If fixing without mounting plate ensure spacers (i.e. washers or nuts) are used between the wall and the

operator to allow for the cover to fit.

Lift operator into position and bolt to the mounting plate.



Turn the knurled disc anticlockwise and position arms so they are approx. 10

when gate is fully closed.

off of being straight