Empire RESURRECTION Краткое руководство по эксплуатации - Страница 2
Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Оборудование для пейнтбола Empire RESURRECTION. Empire RESURRECTION 4 страницы. Autococker
Также для Empire RESURRECTION: Руководство (10 страниц)
Печатать страницуQuick Start Manual
Read the full Operator's Manual for technical information, usage instructions, and
maintenance tips for your Empire Resurrection marker. The full manual can be
found on the CD enclosed with the loader or by contacting Paintball Solutions in
the U.S. at 1-800-220-3222 or in Canada at (866)-685-0030 or by visiting www.
paintballsolutions.com
IMPORTANT: Never carry your marker uncased when not on a playing field. The
non-playing public and law enforcement personnel may not be able to distinguish
between a paintball marker and firearm. For your own safety and to protect the
image of the sport, always carry your marker in a suitable marker case or in the box
in which it was shipped.
• Treat every marker as if it were loaded.
• Never look down the Barrel of a paintball marker.
• Careless use or misuse may result in serious bodily injury or death!
• Keep the marker in "Safe" mode until ready to shoot, safety on and Barrel
blocking device installed in/on the markers Barrel.
• Keep your finger off the trigger until ready to shoot.
• Never point the marker at anything you don't wish to shoot and do not shoot at
fragile objects such as windows.
• Do not aim paintball gun at eyes or head of people or at animals.
• Keep the Barrel blocking device in/on the marker's Barrel when not shooting.
• Paintball guns are to be used with paintballs only.
• Always remove paintballs and the air source before disassembly.
• After removing the air source, point marker in safe direction and discharge until
marker is degassed.
• Store the marker unloaded and degassed in a secure place.
• Follow warnings listed on the air source for handling and storage.
• Every person within range must wear eye, face and ear protection designed
specifically to stop paintballs and meeting ASTM standard F1776.
• Always measure your marker's velocity before playing paintball and never shoot
at velocities in excess of 300 feet-per-second.
• (91.44 meters-per-second).
• Not for sale to persons under 18 years of age.
• Must be 18 years of age or older to operate or handle any paintball gun and/or
paintball gun accessories without adult.
• or parental supervision.
• Use common sense and have fun.
Read and understand all cautions, warnings and this entire manual before loading,
attaching a propellant source or in any way attempting to operate the Empire
Resurrection Autococker marker.
Any tampering with the unit voids the Warranty. The use of non-factory authorized
components within this product may cause a critical failure, fire or shock hazard.
IN NO EVENT SHALL THE SELLER BE LIABLE FOR ANY DIRECT, INDIRECT,
OR CONSEQUENTIAL DAMAGES OF ANY NATURE, OR LOSSES OR ESPENSES
RESULTING FROM ANY DEFECTIVE PRODUCT OR THE USE OF ANY PRODUCT.
WARNING: This product contains one or more chemicals that are known to the
State of California to cause cancer and birth defects or other reproductive harm.
Wash Hands after Handling. You must be 18 years old to purchase this product.
This product may be mistaken for a firearm by law enforcement officers or others.
Altering the color of this product or brandishing in public may be considered a crime.
nt Information
ghts reserved.
Safety and Safe Mode
ed States and
rights are pro-
The Safety is a small mechanical push button on the left side of the marker above
re information
the grips. When the safety is "Off", a red O-ring is visible on the marker. When the
onsports.com
Safety is "On", the red O-ring will be hidden and the marker will not fire.
In this manual, you will see the term "Safe Mode". In "Safe Mode", the safety should
be set to "Safe On" (red marking on safety will not be visible) and a Barrel blocking
device should be installed. Make sure your marker is in "Safe Mode" when the
marker is not being fired or when indicated to do so.
Barrel Installation
obre Patentes
s los derechos
• Take the Barrel Tip and thread the tip into the chosen back section of the Barrel.
más patentes
das, Diseños y
Be careful not to cross the threads which can damage them.
dos Unidos de
• Make sure marker is degassed, loader removed, no paintballs in the Feed Port or
Action Sports
Breech and the marker is in "Safe Mode".
onsports.com
4929_EMP_Ress_QS_Manual.indd 2
• While pointing marker in a safe direction, thread into the front opening of
the marker body.
• Turn the Barrel clockwise until it stops (do not over tighten).
• Install a Barrel blocking device. This can be a Barrel plug or other such device that
prevents the accidental discharge of a paintball.
To determine the correct bore size:
1. Choose a Barrel back section from the available options.
2. Select 5 – 10 paintballs of the same type you will be using to play.
3. Place a ball into the end of the Barrel back
a. Tip the Barrel back, if the ball rolls through without any outside force, switch
to a smaller Barrel Back. The Barrel Back have the size engraved onto the side of
each one (sized .675, .680, .685, .690, .695)
b. If the ball barely fits into the Barrel back and you can't blow it out (easily) switch
to a larger Barrel Back.
4. When the ball is blown out of the Barrel back listen for a small pop sound. If you
can blow the ball out of the Barrel without blowing hard you should have a good
ball-to-bore match.
Note: The more you exhale through the Barrel, the more moisture can accumulate within the insert
and affect your testing. If you notice that the ball is starting to stick, or see a buildup of moisture, clean
and dry the Barrel before continuing with the selection of bore sizes.
Loader Installation
• To install a loader check the Feed Neck and loader to make sure they are free
from debris and obstructions.
• Make sure the Clamp Lever is flipped so as to be "Open".
• Press the loader into the opening of the Feed Neck until it stops.
• Align the loader so that the lid is pointing to the rear and the loader is parallel
with the marker.
• Clamp the loader in place by tightening the Clamp Lever; it may be necessary
to adjust the clamp using the Thumb Screw (see below). Do not over tighten
the loader.
Feed Neck Clamp Adjustment
The Feed Neck clamp may need adjustment for different types/brands of loaders.
Adjust the Thumb Nut clockwise to increase the clamping force or counter clockwise
to decrease the clamping force. No tools are needed to make adjustments.
Pressurizing your Marker
• While pointing the marker in a safe direction, locate the
ASA (Air Source Adapter). The Resurrection Autococker ASA is located on the
bottom of the grip frame.
• Rotate the On/Off ASA Lever to the forward position.
• Insert the threaded end of the air cylinder into the ASA (fig 4.3).
• Without pushing the cylinder, twist the cylinder clockwise and allow the threads
to draw the cylinder into the marker's ASA until it stops. Use caution to not
strip the threads.
• Flip the On/Off Lever back pointing to the rear.
• Your marker is now charged.
FIRING YOUR MARKER
Warning: Always keep your marker pointed in a safe direction! Everyone within
firing range should always use paintball approved eye and face protection in the
presence of live paintball markers. Make sure the marker is set to "Safe Mode",
before following the steps below.
• Cock the marker by pulling the Bolt Pin rearward.
• Install the air cylinder and pressurize the marker.
• Install a paintball loader.
• Put the paintballs into the loader.
• Remove the Barrel-blocking device.
• Aim the marker in a safe direction.
• Set the safety to the "Fire" position, Safety Off.
• Aim the marker at the target.
• Place your finger on the trigger and pull then release.
• The marker will now load a paintball and is ready.
3/12/13 10:52 AM