Empire Sniper Руководство пользователя - Страница 7
Просмотреть онлайн или скачать pdf Руководство пользователя для Оборудование для пейнтбола Empire Sniper. Empire Sniper 14 страниц.
Печатать страницу
before purchasing or connecting one to your Empire marker.
• Check to make sure that you and anyone within range are wearing eye protection
designed specifically for paintball.
• Double check that all screws are tightened and no parts are loose before installing
your tank.
• Ensure you have a barrel plug, barrel bag or other specifically designed barrel-
blocking device in place.
• Make sure there are no paintballs in the marker.
• Set marker to "Safe Mode".
• Cock the marker by moving the pump handle back then forward.
Pressurizing your Marker
• While pointing the marker in a safe direction, locate the ASA (Air Source Adapter).
The Sniper ASA is located on the
bottom of the grip frame.
• Move the On/Off ASA lever to the
forward position.
• Insert the threaded end of the air
cylinder into the ASA. (FIG. 3.3)
• Without pushing the cylinder, twist
the cylinder clockwise and allow the
threads to draw the cylinder into the
marker's ASA until it stops.
• Flip the On/Off lever back. Your
marker is now charged.
WARNING:
• Remember compressed air, nitrogen systems and CO2 cylinders can be extremely
dangerous if misused or improperly handled. Use only cylinders meeting D.O.T. or
regionally defined specifications.
• Never disassemble your tank or tank regulator. Only a qualified and trained
technician should perform work on your tank and tank regulator.
• Never add any lubricants or greases into the fill adapter on your tank regulator
Loading Paintballs
Empire markers use .68 caliber, water-soluble paintballs, readily available at paintball
pro-shops, commercial playing fields, and many sporting goods stores. The paintballs
are feed through the feed elbow into the breech of the marker.
• Make sure the marker is set to "Safe Mode", with Safety ON and barrel blocking
device installed.
• Put on an eye protective device designed specifically for paintball and make sure
that anyone within range of the marker does the same.
• Load quality Empire .68 caliber paintballs (leave some room for paintballs to move
about, inside the loader).
• Your marker is now loaded.
4. FIRING YOUR MARKER
WARNING: Always keep your marker pointed in a safe direction! Everyone within
firing range should always use paintball approved eye and face protection in the
presence of live paintball markers. Make sure the marker is set to "Safe Mode", before
following the steps below.
• Cock the marker by pulling the pump handle rearward.
• Install the air cylinder and pressurize the marker.
• Put the paintballs into the loader.
• Using the pump handle, load a paintball by sliding the pump back then forward.
• Remove the barrel-blocking device.
Fig. 3.3
• Aim the marker in a safe direction.
• Set the Safety to the "Fire" position, Safety OFF.
• Aim the marker at the target.
• Place your finger on the trigger.
• Pull the trigger with a smooth squeezing motion.
• Once the marker is fired, slide pump handle back, then forward, to load the next
paintball.
E M P I R E P A I N T B A L L . C O M
3