Fujitsu PRIMERGY TX120 S2 Дополнительное руководство по обслуживанию - Страница 32
Просмотреть онлайн или скачать pdf Дополнительное руководство по обслуживанию для Сервер Fujitsu PRIMERGY TX120 S2. Fujitsu PRIMERGY TX120 S2 38 страниц.
Печатать страницуFigure 15: Removing the screws
Ê Remove the screws from the system board.
Ê Carefully lift the system board out of the chassis at a slight angle.
Ê Check the settings on the new system board (for a description see the
Technical Manual of the system board).
Ê Insert the system board by holding it at a slight angle.
V
CAUTION!
Never remove the system board by grabbing the fixed heat sinks!
Be careful not to damage the EMI springs, these are required for the
system to comply with applicable EMC regulations and satisfy cooling
requirements and fire protection measures.
Ê Lower the system board carefully into the chassis.
Ê Adjust the system board. If necessary adjust the position of the system
board with a gentle twisting motion.
Ê Fasten the system board with the screws.
Ê Reconnect the cables to their original connectors (see the cabling plans in
the Options Guide).