Fujitsu FI-5900C Процедура замены - Страница 19

Просмотреть онлайн или скачать pdf Процедура замены для Сканер Fujitsu FI-5900C. Fujitsu FI-5900C 22 страницы. Consumable replacement and cleaning instructions
Также для Fujitsu FI-5900C: Начало работы (30 страниц), Руководство по процедурам установки (7 страниц), Руководство по процедурам установки (9 страниц), Процедуры установки (3 страниц), Брошюра и технические характеристики (2 страниц), Дополнительное руководство (4 страниц), Начало работы (30 страниц), Брошюра и технические характеристики (4 страниц), Инструкции по замене и очистке расходных материалов (24 страниц), Инструкции по очистке (2 страниц)

Печатать страницу

leaning the

inCh and

It is very important to clean the scanner pinch and feed rollers on a

regular basis to avoid paper feeding problems. These rollers should be

cleaned every 10,000 sheets. More frequent cleaning will be required

if scanning paper with a large amount of printing, documents filled

out in pencil, or carbonless multipart forms.

Note:

The fi-5900C Scanner has

nine sets of Pinch and Feed

Rollers with two rollers on

each shaft. The Pinch Rollers

are the upper set of rollers

(grey rollers in drawing). The

Feed Rollers are the lower set

of rollers (black rollers in the

drawing to the right)

•

Clean the Pinch Rollers

on the upper side of the

transport path with a lint

free cloth moistened with F1

Cleaner or isopropyl alcohol.

•

Clean the Feed Rollers

on the lower side of the

transport path with a lint

free cloth moistened with F2

Cleaner.

•

Allow the rollers to dry.

•

Close the ADF Cover.

Notes:

Do not use F2 Cleaner on the Pad, Pick Rollers, Separation Rollers,

Brake Roller, and Upper Feed Rollers.

Make sure that the F2 Cleaner has completely dried before feeding

paper.

fi-5900C C

eed

olleRs

Pinch Rollers

onsumable

eplaCement and

Feed Rollers

Pinch Rollers

Feed

Rollers

leaning

nstRuCtions