Fujitsu FI-5900C 교체 절차 - 페이지 19

{카테고리_이름} Fujitsu FI-5900C에 대한 교체 절차을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu FI-5900C 22 페이지. Consumable replacement and cleaning instructions
Fujitsu FI-5900C에 대해서도 마찬가지입니다: 시작하기 (30 페이지), 설치 절차 매뉴얼 (7 페이지), 설치 절차 매뉴얼 (9 페이지), 설치 절차 (3 페이지), 브로셔 및 사양 (2 페이지), 보충 설명서 (4 페이지), 시작하기 (30 페이지), 브로셔 및 사양 (4 페이지), 소모품 교체 및 청소 지침 (24 페이지), 청소 지침 (2 페이지)

페이지 인쇄

leaning the

inCh and

It is very important to clean the scanner pinch and feed rollers on a

regular basis to avoid paper feeding problems. These rollers should be

cleaned every 10,000 sheets. More frequent cleaning will be required

if scanning paper with a large amount of printing, documents filled

out in pencil, or carbonless multipart forms.

Note:

The fi-5900C Scanner has

nine sets of Pinch and Feed

Rollers with two rollers on

each shaft. The Pinch Rollers

are the upper set of rollers

(grey rollers in drawing). The

Feed Rollers are the lower set

of rollers (black rollers in the

drawing to the right)

•

Clean the Pinch Rollers

on the upper side of the

transport path with a lint

free cloth moistened with F1

Cleaner or isopropyl alcohol.

•

Clean the Feed Rollers

on the lower side of the

transport path with a lint

free cloth moistened with F2

Cleaner.

•

Allow the rollers to dry.

•

Close the ADF Cover.

Notes:

Do not use F2 Cleaner on the Pad, Pick Rollers, Separation Rollers,

Brake Roller, and Upper Feed Rollers.

Make sure that the F2 Cleaner has completely dried before feeding

paper.

fi-5900C C

eed

olleRs

Pinch Rollers

onsumable

eplaCement and

Feed Rollers

Pinch Rollers

Feed

Rollers

leaning

nstRuCtions