Aqua Computer Aquaduct 360 eco Руководство по эксплуатации и сборке - Страница 10

Просмотреть онлайн или скачать pdf Руководство по эксплуатации и сборке для Компьютерное оборудование Aqua Computer Aquaduct 360 eco. Aqua Computer Aquaduct 360 eco 20 страниц. Aquaduct eco series

AQUADUCT ECO
It is important to remove the length of hose which had been inserted
into a connector before connecting the hose again. It must not be
scratched to secure a perfect sealing of the connector.
Now a few remarks about our hose. The hose we use is made of poly-
urethane. It has an outer diameter of 8 mm and an inner diameter of 6
mm. It makes a bending radius of less than 10 cm possible and is resist-
ant against many chemicals. A great advantage of the system is that it
seals the hose on the outside. This allows the use of the complete dia-
meter, unlike the use of hose barbs which are inserted into the hose and
therefore have to have a smaller inner diameter than the hose. With a
cross-section area of about 30 mm² the system allows a sufficient flow
even in larger lengths of hose.
6. Installation of the CPU water block (cuplex™ series)
6. Installation of the CPU water block (cuplex™ series)
6. Installation of the CPU water block (cuplex™ series)
6. Installation of the CPU water block (cuplex™ series)

6.1. Preparing the installation of the CPU cooler

6.1. Preparing the installation of the CPU cooler
6.1. Preparing the installation of the CPU cooler
6.1. Preparing the installation of the CPU cooler
Now that you understand how the connection system works, you can be-
gin installing the CPU cooler.
- 10 -
As mentioned earlier, with any work you
do on your computer, you should always
save your data beforehand. Disconnect
save your data
save your data
save your data
your computer from the power supply.
To protect the sensible hardware you
should ground yourself before installa-
tion to avoid electrostatic destruction of
the component parts. For that purpose
you can use a non-isolated water pipe
for example.
If you are upgrading an existing system
you have to remove the old cooler from
the processor first. For that purpose
please read the manual of your cooler or
your motherboard. After removing the
cooler you have to clean the die of the
processor of any residue of old heat-
Aqua Computer GmbH & Co. KG
Gelliehäuser Str. 1, 37130 Gleichen
© 2007-2016