Aqua Computer Aquaduct 360 eco Руководство по эксплуатации и сборке - Страница 11

Просмотреть онлайн или скачать pdf Руководство по эксплуатации и сборке для Компьютерное оборудование Aqua Computer Aquaduct 360 eco. Aqua Computer Aquaduct 360 eco 20 страниц. Aquaduct eco series

Печатать страницу

conductive paste. Then take a razor blade or a plastic spatula and apply

a thin

thin layer of our supplied heat-conductive paste. The core of the pro-

thin

cessor, also called "die", should now be coated by a homogeneous

white layer. Make sure that no heat-conductive paste will get on any

Make sure that no heat-conductive paste will get on any

other place and remove it if necessary!

WARNING: If the cooler gets stuck on the surface of the die it can

cause an edge of the die to break off. This results in an unrecoverable

destruction of the processor. Avoid the cooler to get stuck under any

condition. Even so-called spacers do not offer absolute protection. If

you are not confident in doing this yourself, please ask a dealer to do

it for you.

The principle of installation depends entirely on the kind of fastening of

the cooler. That is why we confine the illustration of the installation in-

structions mainly on description of a classic cuplex on a socket A

motherboard. From this description the procedure for any combination

of cooler and fastening version can be derived.

6.2. Installation of "4-hole-mounting kits" - Socket, 775, 1366, AM2

Should be more than four feathers included in the screw set, please use

the four „softer" feathers.

With the so-called four-hole-mounting kit the cuplex is fixed directly on

the motherboard with four screws and pressure springs which are used

as screw springs. Therefore you have to fasten the four screws first. For

another plastic washer over the screw from above the motherboard and

then screw on one of the supplied stainless steel M4 nuts up to the limit

that purpose detach your motherboard from the

computer case. In P4- and Xeon-systems the

mostly black plastic mounting for air-coolers

has to be removed from the motherboard to re-

veal the necessary drill holes on it. Next slide a

plastic washer over one of the supplied stainless

steel M4 screws which you then put through the

holes adjacent to the socket from below. Slide

Aqua Computer GmbH & Co. KG

Gelliehäuser Str. 1, 37130 Gleichen, Germany

AQUADUCT ECO

- 11 -