Dell EqualLogic PS Series Руководство пользователя аппаратного обеспечения - Страница 7

Просмотреть онлайн или скачать pdf Руководство пользователя аппаратного обеспечения для Хранение Dell EqualLogic PS Series. Dell EqualLogic PS Series 50 страниц. Storage arrays
Также для Dell EqualLogic PS Series: Настройка (2 страниц), Руководство пользователя аппаратного обеспечения (48 страниц), Обслуживание оборудования (46 страниц)

1 Basic Storage Array Information

This chapter includes information about the location and basic operation of the replaceable

components in a storage array, tools and equipment you will need, protecting hardware from

electrostatic discharge, and power on and off operations.

The PS6610 array is a PS6x10 10GbE class EqualLogic PS Series array that continues the focus by

Dell on industry-standard features and capabilities for the midrange iSCSI SAN market. PS Series

Storage Arrays version 8.0 introduces the PS6610.

The PS6610 array is a 5U chassis that can be configured with either 42 or 84 drives. Both 2.5-inch

and 3.5-inch drives are supported in either configuration. Features of the PS6610 include:

• Two hot-swappable Type 18 control modules, which contain increased memory (16GB per

controller) and a more powerful processor than previous generation controllers.

• 5U SAS Drive Enclosure

• Ethernet ports:

– Two pairs of 10Gb/s dual-media interfaces (10GBASE-T/SFP+)

– Ability to fall back to 1 GB/s interface (10GBASE-T ports only)

• Support for ReadyRails™ II

Front-Panel Features and Indicators

The main features of the front panel are shown in

right sides of each drawer on the PS6610 each contain an anti-tamper lock (see

handle for opening the drawer, and a sideplane status indicator (see

operation and activity of each sideplane. As you face the front of the chassis, an Enclosure Status

Indicator is located on the left edge that provides status information for the entire array (see

4).

•

Table 2

describes the sideplane status indicators located on the drawers.

•

Table 3

describes the enclosure indicator.

Figure 1

and identified in

Figure

Table

1. The left and

Figure

2), a recessed

3) that monitors the

Figure