Dell PowerVault DR4100 Руководство по лучшей практике - Страница 30

Просмотреть онлайн или скачать pdf Руководство по лучшей практике для Хранение Dell PowerVault DR4100. Dell PowerVault DR4100 41 страница. Backup and recovery appliance
Также для Dell PowerVault DR4100: Руководство по началу работы (10 страниц), Руководство (37 страниц), Примечание к выпуску (16 страниц), Руководство (12 страниц), Руководство (24 страниц), Руководство (23 страниц), Настройка Qiuck (1 страниц), Руководство (27 страниц), Руководство (25 страниц)

Scenario 3: Replication between sites with dedicated interfaces

6.3.1.5

Daniel has two sites, each with a DR appliance that he wishes to configure as a replication pair over dedicated links.

Each DR appliance will have the following configuration:

• DR1 has 2x 10GB interfaces in bond0 with 2 x1GB interfaces not bonded dedicated to replication

• DR2 has 2x 10GB interfaces in bond0 with 2 x10GB interfaces not bonded dedicated to replication

Figure 5

In the default configuration of the DR, the default route for the system is always is set on the network which belongs to

bond0. In this example for both the DRs the default route points to the gateway on the 10.250.232.x network. This allows

for administration of the DR from anywhere on the network.

Example route:

[root@DR1 ~]# route

Kernel IP routing table

Destination Gateway

10.250.232.0 *

default

In order for the two DRs to replicate over the dedicated links, static routes should be provisioned in such a way that the

replication flows over those paths. This is done in the steps below.

DR4100 Best Practice Guide | April 2014

Scenario 3 topology

Genmask

255.255.248.0 U

10.250.232.1 0.0.0.0

Flags Metric Ref Use Iface

0 bond0

UG 0

0 bond0