Dell DF10MXL Руководство по началу работы - Страница 21

Просмотреть онлайн или скачать pdf Руководство по началу работы для Переключатель Dell DF10MXL. Dell DF10MXL 36 страниц. Networking mxl 10/ 40gbe switch io module

Печатать страницу

Connecting a Console Terminal

After the MXL 10/40GbE Switch powers on, complete all external cabling

connections and connect a terminal to the blade to configure the switch.

NOTE: If you are installing a stack of MXL 10/40GbE Switches

to the console port on the Master Switch. If you connect the terminal to a member

(non-Master) switch, you will not be able to use the CLI. For more information, refer

to Assembling a Switch Stack.

Read the Release Notes for this product before proceeding. You can download the

release notes from the Dell Support website at support.dell.com/manuals.

To monitor and configure the switch via the serial console, use the USB

console port on the front panel of the switch (Figure 1-4) to connect it to a

VT100 terminal or to a computer running VT100 terminal emulation

software. The console port is implemented as a data terminal equipment

(DTE) connector.

The following equipment is required to use the console port:

•

VT100-compatible terminal or a desktop or a portable computer with a

serial port running VT100 terminal emulation software, such as Microsoft

HyperTerminal.

•

A serial cable (provided) with a USB type-A connector for the console port

and DB-9 connector for the terminal.

To connect a terminal to the switch console port, perform the following tasks:

1 Connect the DB-9 connector on the serial cable to the terminal or

computer running VT100 terminal emulation software.

2 Configure the terminal emulation software as follows:

Select the appropriate serial port (for example, COM 1) to connect to

the console.

Set the data rate to 9600 baud.

Set the data format to 8 data bits, 1 stop bit, and no parity.

Set the flow control to none.

Set the terminal emulation mode to VT100.

Select Terminal keys for Function, Arrow, and Ctrl keys. Ensure that

the setting is for Terminal keys (not Microsoft Windows keys).

Installing and Configuring the Switch

, connect the terminal