Dell DF10MXL Руководство по началу работы - Страница 23

Просмотреть онлайн или скачать pdf Руководство по началу работы для Переключатель Dell DF10MXL. Dell DF10MXL 36 страниц. Networking mxl 10/ 40gbe switch io module

Печатать страницу

These settings are necessary to allow remote management of the switch

through a Telnet (Telnet client) or HTTP (Web browser) connection.

NOTE:

The switch is configured with a default user name (root) and password

(calvin).

Initial Configuration Procedure

Perform the initial configuration from the connected console by using the

CLI.

Configuring the SNMP Server

To set up the SNMP account and provide read/write privileges, use the

server community

Create an SNMP community string with read/write privileges by entering the

snmp-server community

CONFIGURATION mode.

Enter IP ACCESS LIST mode by naming a standard IP access list by entering the

ip access-list standard

3 Configure the management IP address to manage the SNMP query of

the chassis

by entering the permit

CONFIGURATION-IP ACCESS-LIST-STANDARD mode.

With this configuration, the SNMP query is accepted only from the

configured IP .

NOTE:

If you want any SNMP management entity to access the chassis, ignore

steps 2 and 3.

Configuring the Username and Password

To access the system remotely, configure a system username, password, and

privilege level.

Configure a username, password

username

password <

mode.

command.

<community_name> rw <ACL_NAME>

<ACL_NAME>

in CONFIGURATION mode.

<Management_System_IP>

, and privilege level by entering the

LINE

privilege level

Installing and Configuring the Switch

command in

command in CONFIGURATION

snmp-

username