digico SD7 Технические заметки - Страница 6

Просмотреть онлайн или скачать pdf Технические заметки для DJ оборудование digico SD7. digico SD7 11 страниц. Replacing and cleaning faders
Также для digico SD7: Руководство (9 страниц)

Печатать страницу
digico SD7 Технические заметки
TN198 Page 6 of 11
The image below shows the Engine with the Optocore Board fitted.
The Following Connections now need to be made :
1 x Serial Connection from Optocore Board to PC
2 x Optical Fibre Connections from Optocore Board to Rear Panel of Engine*
* If you have ordered a 2 Loop Upgrade Kit, you will be provided with 4 HMA-LC Fibre Cables
Note that the network (RJ45 / Cat 5 connections) are not implemented at this time.
No RJ45 cables need to be connected.
Install Ribbon cable provided to connect between the Upper serial port (COM1) of the PC and the
10 way header on the optical card. It is easiest to fit the PC end of the cable first. When connected,
secure with the hex head bolts provided.
TN198.doc\