digico SD7 Notas técnicas - Página 6

Navegue en línea o descargue pdf Notas técnicas para Equipo para DJ digico SD7. digico SD7 11 páginas. Replacing and cleaning faders
También para digico SD7: Manual (9 páginas)

Imprimir página
digico SD7 Notas técnicas
TN198 Page 6 of 11
The image below shows the Engine with the Optocore Board fitted.
The Following Connections now need to be made :
1 x Serial Connection from Optocore Board to PC
2 x Optical Fibre Connections from Optocore Board to Rear Panel of Engine*
* If you have ordered a 2 Loop Upgrade Kit, you will be provided with 4 HMA-LC Fibre Cables
Note that the network (RJ45 / Cat 5 connections) are not implemented at this time.
No RJ45 cables need to be connected.
Install Ribbon cable provided to connect between the Upper serial port (COM1) of the PC and the
10 way header on the optical card. It is easiest to fit the PC end of the cable first. When connected,
secure with the hex head bolts provided.
TN198.doc\