Siemens SINAMICS G120 Компактная инструкция по эксплуатации - Страница 27

Просмотреть онлайн или скачать pdf Компактная инструкция по эксплуатации для Промышленное оборудование Siemens SINAMICS G120. Siemens SINAMICS G120 32 страницы. Using blocksize converters in marine applications
Также для Siemens SINAMICS G120: Начало работы (46 страниц), Руководство по эксплуатации (32 страниц), Начало работы (30 страниц), Инструкции по установке оборудования (2 страниц), Инструкции по установке и руководство пользователя (2 страниц), Инструкции по установке (2 страниц), Инструкции по установке (2 страниц), Руководство (42 страниц), Начало работы (50 страниц), Руководство по эксплуатации устройства (34 страниц), Руководство по быстрой установке (2 страниц), Описание приложения (50 страниц), Компактная инструкция по эксплуатации (2 страниц), Руководство (31 страниц), Руководство по применению (34 страниц), Компактная инструкция по эксплуатации (2 страниц), Компактная инструкция по эксплуатации (2 страниц)

Печатать страницу
Siemens SINAMICS G120 Компактная инструкция по эксплуатации
Examples for telegrams via PROFIBUS and PROFINET
Telegram 1:
Control word 1 (STW1), PZD receive word 1 (word: r2050[0], bits: r2090.00 ... r2090.15)
Bit
Meaning
0
0 = OFF1
0 → 1 = ON
1
0 = OFF2
1 = No OFF2
2
0 = Quick stop (OFF3)
1 = No quick stop (OFF3)
3
0 = Inhibit operation
1 = Enable operation
4
0 = Disable RFG
1 = Do not disable RFG
5
0 = Stop RFG
1 = Enable RFG
6
0 = Inhibit setpoint
1 = Enable setpoint
7
0 → 1 = Acknowledge faults
8, 9
Reserved
10
0 = No control via PLC
1 = Control via PLC
11
1 = Direction reversal
12
Not used
13
1 = MOP up
14
1 = MOP down
15
Reserved
CU240B-2 and CU240E-2 Control Units
Compact Operating Instructions, 04/2015, A5E35792002B AA
Explanation
The motor brakes with the ramp-down time p1121 of the ramp-function generator.
The inverter switches off the motor at standstill.
The inverter goes into the "ready" state. If, in addition bit 3 = 1, then the inverter
switches on the motor.
Switch off the motor immediately, the motor then coasts down to a standstill.
Precondition in order to be able to switch on the motor using bit 0 (ON command).
The motor brakes with the OFF3 ramp-down time p1135 down to standstill.
Precondition in order to be able to switch on the motor using bit 0 (ON command).
Switch off the motor immediately → motor coasts down to a standstill.
Precondition in order to be able to switch on the motor using bit 0 (ON command).
The inverter immediately sets its ramp-function generator output to 0.
The ramp-function generator can be enabled.
The output of the ramp-function generator stops at the actual value.
The output of the ramp-function generator follows the setpoint.
The inverter brakes the motor with the ramp-down time p1121 of the ramp-function
generator.
Motor accelerates with the ramp-up time p1120 to the setpoint.
Acknowledge fault. If the ON command is still active (bit 0 = 1), the inverter
switches to "closing lockout" state.
The inverter ignores the process data from the fieldbus.
Control via fieldbus, the inverter accepts the process data from the fieldbus.
Invert setpoint in the inverter.
Increase the setpoint saved in the motorized potentiometer.
Reduce the setpoint saved in the motorized potentiometer.
Changes over between settings for different operation interfaces (command data
sets).
4.3 Connecting the inverter to the fieldbus
STW1
Control word 1
ZSW1
Status word 1
PZD01/02
Process data 16-bit
NSOLL_A
Speed setpoint
NIST_A
Speed actual value
Commissioning
27