CAB 5326C Инструкция по сборке Руководство - Страница 12
Просмотреть онлайн или скачать pdf Инструкция по сборке Руководство для Промышленное оборудование CAB 5326C. CAB 5326C 15 страниц. Vacuum-belt applicator
Печатать страницу
5
Operation
12
5.1
Standard Operation
Before commencing the labeling process check that the underlying connection are active.
Load material. Ensure that the locking system is locked "Operator's Manual" of the printer.
Switch on the printer.
Press the feed key at the printer.
A synchronization feed is initiated. The processed labels need to be removed manually. After a few seconds the
printer carries out a short back feed to position the front edge of the next label at the printing line.
Note!
i
This synchronizing also has to be carried out when the print job has been interrupted with the cancel key.
Synchronizing is not necessary when the print head was not lifted between print jobs. This also applies if
the printer was powered off between print jobs.
Start a print job
Start the labelling process via PLC interface.
Error messages during labelling process are shown in the display of the printer Error Messages.
5.2
Cleaning
Attention!
!
Never use solvent and abrasive.
Fig. 7
Cleaning
1
2
Clean the outside surfaces and
3
4
Clean the fan area with a soft brush
Use glass cleaner to clean the reflex
To clean the pressure roller use a
transport belts with multi purpose
cleaner: Area 1
and/or a vacuum cleaner: Area 2
sensor: Area 3
special roller cleaner: Area 4
12