Cisco ASR 9000 Series Руководство - Страница 38

Просмотреть онлайн или скачать pdf Руководство для Сетевое оборудование Cisco ASR 9000 Series. Cisco ASR 9000 Series 44 страницы. Line card
Также для Cisco ASR 9000 Series: Настройка параметров сети (26 страниц), Руководство по конфигурации (46 страниц), Руководство по конфигурации (50 страниц), Руководство (24 страниц), Настройка (46 страниц), Краткое справочное руководство (7 страниц)

Печатать страницу

Migrating from RSP4/RSP4-S/RSP-L to RSP5 Card

0/0/CPU0

0/2/CPU0

0/3/CPU0

Migrating from RSP4/RSP4-S/RSP-L to RSP5 Card

Before you begin:

• You must have console access to the router. Default console speed on RSP5 is set as 115200.

• The router must be running Cisco 64-bit IOS XR software release 6.5.15 or later version. If your router

• The router must have two RSP4/S/L cards (active and standby) up and running. In this section, RSP

• First and second generation Cisco ASR 9000 Ethernet Line Cards must be removed from the chassis as

Procedure

Step 1

Use the show redundancy summary command to verify that the RSP0 and RSP1 are in Ready State.

Example:

Router# show redundancy summary

Active/Primary Standby/Backup

-------------- --------------

0/RSP0/CPU0(A)

0/RSP1/CPU0(P)

Step 2

Shutdown the standby RSP card (slot 1) using the admin hw-module shutdown location 0/RSP1 command.

Step 3

Remove the standby RSP card (slot 1). When RSP is removed, an alarm is generated indicating that the

redundancy is lost. Follow the procedure explained in the topic

Chassis, on page

Step 4

Insert RSP5 in slot 1 and allow RSP5 to bootup.

Step 5

Verify both the RSPs are in IOS XR RUN state using the show platform command.

Example:

Router#show platform

Node

--------------------------------------------------------------------------------

Replacing Cisco ASR 9000 Series Router Components

A99-8X100GE-TR

A99-12X100GE

A99-8X100GE-TR

is running a 32-bit IOS XR release, you will need to migrate to 64-bit XR release 6.5.15 or later. Refer

Migration Guide for Cisco ASR 9000 Series

Note

RSP5 is only supported with 64-bit IOS XR software releases.

refers to RSP4/RSP4-S/RSP4-L in the system.

they are incompatible with RSP5.

0/RSP1/CPU0(S) (Node Ready, NSR: Ready)

0/RSP1/CPU0(B) (Proc Group Ready, NSR: Ready)

25.

Type

Replacing Cisco ASR 9000 Series Router Components

IOS XR RUN

PWR,NSHUT,MON

IOS XR RUN

PWR,NSHUT,MON

IOS XR RUN

PWR,NSHUT,MON

Routers.

Removing and Replacing Cards from the

State

Config state