Cisco Firepower 4100 Series Руководство - Страница 7

Просмотреть онлайн или скачать pdf Руководство для Сетевое оборудование Cisco Firepower 4100 Series. Cisco Firepower 4100 Series 8 страниц. Rack-mount and ground the chassis
Также для Cisco Firepower 4100 Series: Руководство по эксплуатации (17 страниц), Руководство по техническому обслуживанию и модернизации (20 страниц), Руководство (36 страниц), Руководство (8 страниц), Руководство (42 страниц), Руководство (38 страниц)

Rack-Mount the Chassis

Step 1

Use a wire-stripping tool to remove approximately 0.75 in. (19 mm) of the covering from the end of the grounding cable.

Step 2

Insert the stripped end of the grounding cable into the open end of the grounding lug.

Figure 5: Insert the Cable into the Grounding Lug

Step 3

Use the crimping tool to secure the grounding cable in the grounding lug.

Step 4

Remove the adhesive label from the grounding pad on the chassis.

Step 5

Place the grounding lug against the grounding pad so that there is solid metal-to-metal contact, and insert the 2 screws

with washers through the holes in the grounding lug and into the grounding pad.

Step 6

Make sure that the lug and cable do not interfere with other equipment.

Step 7

Prepare the other end of the grounding cable and connect it to an appropriate grounding point in your site to ensure

adequate earth ground.

What to do next

Install the cables according to your default software configuration as described in the

for your version.

• Two 10-32 x .375-in. screws used to secure the ground lug

Ground the Chassis

Getting Started Guide

Rack-Mount the Chassis