Cisco UCS B200 M4 Указания по установке и обслуживанию - Страница 36

Просмотреть онлайн или скачать pdf Указания по установке и обслуживанию для Сервер Cisco UCS B200 M4. Cisco UCS B200 M4 46 страниц. For e5-2600 v4 series cpus
Также для Cisco UCS B200 M4: Указания по установке и обслуживанию (30 страниц), Руководство по обновлению (9 страниц), Руководство по обслуживанию (24 страниц)

Installing an Adapter Card

Tip

Figure 18: Installing an mLOM Adapter

All supported adapter cards have a shared installation process. A list of currently supported and available

models for this server is in the specification sheets at this URL:

http://www.cisco.com/en/US/products/ps10280/products_data_sheets_list.html

The UCS B200 M4 blade server has two adapter slots (Slots 1 and 2) that support the following VIC cards:

• VIC 1340 and VIC 1380

• VIC 1240 and VIC 1280

Slot 1 is for the VIC 1340 or VIC 1240 cards. Slot 2 is for the VIC 1380 and VIC 1280 cards, and can also

be used for the VIC port expander, the Intel Crypto mezzanine card, and non-I/O mezzanine cards, such as

Fusion IO.

When the Cisco Nexus 2104XP Fabric Extender (FEX) module is used, the VIC 1280 and the VIC port

Note

expander cards are ignored because there are no traces on the Cisco 2104XP to connect to any VIC or IO

card installed in Slot 2.

Cisco UCS B200 M4 Blade Server Installation and Service Note

To remove a VIC, reverse the above procedure. You might find it helpful when removing the connector

from the motherboard to gently rock the board along the length of the connector until it loosens.

Servicing a Blade Server