Cisco 2600 Series Руководство по установке

Просмотреть онлайн или скачать pdf Руководство по установке для Шлюз Cisco 2600 Series. Cisco 2600 Series 12 страниц. Configuring adsl wic to support pppoe clients
Также для Cisco 2600 Series: Информация о выпуске (32 страниц), Конфигурация (15 страниц), Примечание по применению (41 страниц), Информационный лист (6 страниц), Приложение (15 страниц), Руководство по установке (22 страниц), Обзор (13 страниц), Краткое руководство по эксплуатации (2 страниц), Руководство (5 страниц)

Doc. No.

78-5172-01

Installing the Cisco RPS Adapter Plate

in Cisco 2600 Series Routers

Product Number: ACS-2600RPS=

This document describes how to install an adapter plate in Cisco 2600 series routers for use with the

Cisco Redundant Power System (RPS). The Cisco RPS provides power system redundancy to

external devices (such as routers, switches, or hubs). The system includes two fully redundant AC

input power modules and four DC output power modules for connection to external devices. The

Cisco RPS supports quasi-redundant and fully redundant power source conﬁgurations. To use the

Cisco RPS with Cisco 2600 series routers, you must remove the existing power supply and replace

it with a Cisco RPS adapter plate.

This document includes the following sections:

•

•

•

•

•

•

•

•

Follow these guidelines to ensure general safety:

•

Keep the chassis area clear and dust-free during and after installation.

•

Put the removed chassis cover in a safe place.

Corporate Headquarters

Cisco Systems, Inc.

170 West Tasman Drive

San Jose, CA 95134-1706

USA

Cisco Systems, Inc.