Cisco 2600 Series Руководство по установке

Просмотреть онлайн или скачать pdf Руководство по установке для Шлюз Cisco 2600 Series. Cisco 2600 Series 22 страницы. Configuring adsl wic to support pppoe clients
Также для Cisco 2600 Series: Руководство по установке (12 страниц), Информация о выпуске (32 страниц), Конфигурация (15 страниц), Примечание по применению (41 страниц), Информационный лист (6 страниц), Приложение (15 страниц), Обзор (13 страниц), Краткое руководство по эксплуатации (2 страниц), Руководство (5 страниц)

This chapter guides you through the installation of the Cisco 2600 series routers and includes the

following sections:

Required Tools and Equipment, page 3-1

•

•

•

•

Only trained and qualified personnel should be allowed to install or replace this equipment. To see

Warning

translations of the warnings that appear in this publication, refer to the Regulatory Compliance

and Safety Information document that accompanied this device.

Installation might require some tools and equipment that are not provided as standard equipment with

the router. Following are the tools and parts required for a typical router installation:

•

Number 2 Phillips screwdriver.

Flat-blade screwdrivers: small, 3/16-in. (0.476 cm) and medium, 1/4-in. (0.625 cm).

•

Electrostatic discharge (ESD)-preventive wrist strap.

•

Screws to secure the rack-mount brackets to the router.

Grounding lug with attaching screws.

•

Cables for connecting a PC or modem to the router (included).

Cables for connection to the WAN and LAN ports (dependent on configuration):

•

OL-2171-02

Ethernet 10BASE-T cable for connection to an Ethernet port (included).

Ethernet 100BASE-T cable for connection to a Fast Ethernet port (included).

Token Ring lobe cable for connection to the Token Ring port (included).

C H A P T E R

Cisco 2600 Series Routers Hardware Installation Guide

3-1