Clarke 7610960 Руководство по эксплуатации и техническому обслуживанию - Страница 2
Просмотреть онлайн или скачать pdf Руководство по эксплуатации и техническому обслуживанию для Инструменты Clarke 7610960. Clarke 7610960 8 страниц. Tube roller
Печатать страницуINTRODUCTION
Thank you for purchasing this CLARKE Tube Roller.
Before attempting to use the tube roller it is essential that you read this manual
thoroughly and carefully follow all instructions given. In doing so you will ensure
the safety of yourself and that of others around you and you can also look
forward to the product giving you long and satisfactory service.
FUNCTIONS
1. This tool is intended to bend mild steel, copper and aluminum tubing. It
can be used for bending exhaust pipes, water pipe and electrical conduit.
DO NOT bend plastic or PVC pipe with this tool.
2. This tool includes 6 rollers: 3 rollers for round tube and 3 rollers for square
tube. If the upper roller is for round tube, then the lower roller must be for
round tube. If the upper roller is for square tube then the lower roller must
be for square tube. DO NOT mix the use of round and square rollers.
SAFETY PRECAUTIONS
• Due to the weight of the tube roller the help of an assistant may be
beneficial during unpacking or when moving it around.
• ALWAYS operate on a suitably strong bench with adequate light.
• ALWAYS check for signs of cracked welds or any other structural damage
before starting work. DO NOT operate if any of these conditions exist. Have
repairs made only by a CLARKE service centre.
• The components of this tube roller are designed to withstand the rated
capacity. DO NOT substitute any other components or exceed the rated
capacity.
• ALWAYS ensure the workpiece is secure before applying pressure.
• DO NOT allow anyone who is unfamiliar with this tool to use the tube roller
unless they are under direct supervision.
• ALWAYS ensure the work piece is properly positioned.
• ALWAYS keep hands and fingers away from parts that may pinch or shift.
• NEVER use extension tubes to increase the length of the handle. Excessive
effort can cause damage and/or accidents.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
2