CubuSynth Exhaust Руководство по сборке - Страница 6

Просмотреть онлайн или скачать pdf Руководство по сборке для Музыкальная педаль CubuSynth Exhaust. CubuSynth Exhaust 12 страниц. Expander module for the engine
Также для CubuSynth Exhaust: Руководство пользователя (5 страниц)

Печатать страницу
CubuSynth Engine - Build Guide
PCB V1.1 Jul 2022
STEP 5 (Main PCB)
Transistor
Take the 2N3904, put it in place and make sure the orientation is correct. The outline of the
transistor has to match with the silkscreen on the PCB. You can bend the 2 outer legs of each
transistor, so it doesn't fall out when turning around the board.
The footprint is quite small, so stay focused and don't use too much solder to avoid shorts.
Check your solder joints with a magnifier and/or multimeter when in doubt.
STEP 6 (Main PCB)
IC sockets
3
IC Socket 14Pin
Oriantation is important to know how to place the ICs later! The notch should face upwards,
matching the print on the PCB.
You can use tape to hold them in place, put the other PCB on top, or bend 2 pins of each socket
inwards, so they don't fall when turning the board around. Then solder everything.
Page 6