ARTHUR HOLM AHDTL Руководство пользователя - Страница 12
Просмотреть онлайн или скачать pdf Руководство пользователя для Подъемные системы ARTHUR HOLM AHDTL. ARTHUR HOLM AHDTL 20 страниц. Universal motorized system for gooseneck microphones
Также для ARTHUR HOLM AHDTL: Руководство пользователя (13 страниц)
Печатать страницуControls & Connectors
MICROPHONE LENGTH SETTING PROCEDURE
DynamicTalk is designed to work with microphones of different lengths. Two
signs to identify an incorrect setup of the microphone length are:
- The microphone do not goes down completely.
- The microphone goes down too slowly, and gets stuck inside.
The microphone length can be adjusted using the Monitor Configurator
Tool, but there is also a quick procedure that doesn't require the use of a
PC and cable:
12
1. Disconnect the Power connector
2. Set switch 5 to ON position
3. Set the length of the microphone in the rotatory switch,
in cm. For instance, if the microphone is 40cm, set the
rotatory switch as: tens=4, unit=0
4. Connect to Power. There will be a 5 beep sound
5. Disconnect Power
6. Set switch 5 to OFF position
7. Set the AHnet address in the rotatory switch, the default
setting is address 01 (tens=0, units=1).
8. Connect the Power connector