ARTHUR HOLM AHDTL Benutzerhandbuch - Seite 12

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Hebesysteme ARTHUR HOLM AHDTL herunter. ARTHUR HOLM AHDTL 20 Seiten. Universal motorized system for gooseneck microphones
Auch für ARTHUR HOLM AHDTL: Benutzerhandbuch (13 seiten)

Seite drucken

Controls & Connectors

MICROPHONE LENGTH SETTING PROCEDURE

DynamicTalk is designed to work with microphones of different lengths. Two

signs to identify an incorrect setup of the microphone length are:

- The microphone do not goes down completely.

- The microphone goes down too slowly, and gets stuck inside.

The microphone length can be adjusted using the Monitor Configurator

Tool, but there is also a quick procedure that doesn't require the use of a

PC and cable:

1. Disconnect the Power connector

2. Set switch 5 to ON position

3. Set the length of the microphone in the rotatory switch,

in cm. For instance, if the microphone is 40cm, set the

rotatory switch as: tens=4, unit=0

4. Connect to Power. There will be a 5 beep sound

5. Disconnect Power

6. Set switch 5 to OFF position

7. Set the AHnet address in the rotatory switch, the default

setting is address 01 (tens=0, units=1).

8. Connect the Power connector