Artist Guitars TL DIY KIT Руководство - Страница 7

Просмотреть онлайн или скачать pdf Руководство для Музыкальный инструмент Artist Guitars TL DIY KIT. Artist Guitars TL DIY KIT 14 страниц.

Artist Guitars TL DIY KIT Руководство
TL DIY KIT MANUAL

NECK

With the body placed face up on a protective surface, position the neck
into the neck cutout until it is fully inserted.
Turn the assembly over and position the neck plate (with its black protective
seal) over the four bolt holes at the rear of the body and drive in the four
long screws through the neck plate, body and pilot holes in the neck until all
fits tightly

WIRING

The pickups and controls are pre-assembled on the pickguard and simply
need to be connected to the output jack socket and earth. Wiring is
implemented as plug-in modules, soldering is not required.
The neck pickup is pre-assembled on the pickguard, however, the bridge
pickup is pre-assembled on the bridge. Each pickup has one loose cable.
Insert the cable with connector into the small hole in each pickup cavity until
it runs through and reaches the cavity of the control panel.
7