AMCOL 6000P Operatör El Kitabı - Sayfa 8
Yağlama sistemleri AMCOL 6000P için çevrimiçi göz atın veya pdf Operatör El Kitabı indirin. AMCOL 6000P 19 sayfaları. Pneumatically controlled precision lubrication system
Sayfayı YazdırManual Actuation
To manually test the system to observe spray output, perform
the following:
Activate System Actuation Solenoid. This solenoid
•
should remain open while testing spray volume and
pattern. Modify Dispersing Air and Injection Rate and
Volume settings as necessary.
To manually activate the solenoid, press the manual
override button
Manual operation should be used to verify current settings, test
spray coating, and troubleshoot.
6000P PNEUMATICALLY CONTROLLED PRECISION LUBRICATION SYSTEM
Automatic Actuation
To automatically use the 6000P system, it
should be interfaced with the control PLC,
which should contain the following
sequence:
• Activate the System Actuation Solenoid
whenever the system is operating.
While running automatically, the spray
volume and pattern should be consistent.
No misting or fogging should be present.
See Section 7 for troubleshooting.
Operator's Manual
P A G E | 7