Aktakom ATK-2001 Kullanıcı Kılavuzu - Sayfa 7

Ölçüm Cihazları Aktakom ATK-2001 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Aktakom ATK-2001 11 sayfaları. Clamp meter

3.2. DC/AC Voltage Measurements

WARNING: Maximum input for DC V is 600, and for AC V is 600. Do not

attempt to take any voltage measurement that exceeds the limits. Exceeding

the limits could cause electrical shock and damage to the clamp meter.

3.2.1. DC Voltage

a. Set the rotary switch at V DC.

b. Insert the test leads into the input jack.

c. Connect the test prods of the test leads in PARALLEL to the circuit to be

measured.

d. Read the measured value from the LCD display.

3.2.2. AC Voltage

a. Set the rotary switch at V AC.

b. Insert the test leads into the input jack.

c. Connect the test prods of the test leads in PARALLEL to the circuit to be

measured.

d. Read the measured value from the LCD display.

The zero button also can be used to make a relative measurement. Once the